13
Removing the headrest cover:
Raise the headrest.
Pull the headrest cover forward and off from the headrest.
Reverse the above sequence to re-fit the cover.
WARNING: The cover is a safety feature. Never use the child car seat
without it.
Installing for group 3 [22-36kg]
If the vehicle has no seatbelt height adjuster you may need
to fit one. If there is a seatbelt height adjuster fitted in your
vehicle, it must be set to its lowest position.
With the booster seat in a suitable forward facing vehicle seat, place
your child in position and buckle-up the lap and shoulder belt.
IMPORTANT:
1. Ensure that the lap belt section is over your child’s lap and routed
under both armrests and that the shoulder belt passes under the
armrest nearest the buckle (W).
2. Ensure that the lap belt section is worn low down and firmly
engaged with the pelvis and that the shoulder belt passes over the
child’s shoulder and
NOT
across the neck.
3. Ensure that the seat belt straps are not twisted. Remove the excess
slack from both the lap and shoulder belt by pulling them tight.
WARNING: The booster seat (when not in use) should be either stored
safely in the boot of the car or secured to a seat using the seatbelt.
27
28
Removing and refitting the seat covers
Removing the backrest cover:
Press harness release button (
I
) and pull up on the shoulder
straps (not the shoulder pads) to completely loosen the
shoulder straps and shorten the adjuster strap (J) as much as possible.
IMPORTANT:
Do not pull the shoulder pads or the straps above the
shoulder pads.
29
Summary of Contents for Group 1,2,3 Car Seat
Page 18: ...16 ...
