9
With the harness straps over the sides of the child car seat
place your child in the seat.
Press the red harness release button (G) on the buckle and
unfasten the harness.
Press the harness adjuster button (
I
) and pull forward on the
shoulder straps (not the shoulder pads) to completely loosen
the harness.
Note:
The harness adjuster button is located under the seat cover
approximately 4cm above where the adjuster strap (J) exits the seat
cover.
i. Check!
The vehicle seatbelt has been pulled tight and is not
twisted.
ii. Check!
The vehicle seatbelt has been routed correctly.
iii. Check!
The seatbelt connector tongue has been inserted correctly.
iv. Check!
The child car seat is pulled back into the vehicle seat.
Pass the both the lap and diagonal sections of the seatbelt
under the armrest closest to the adult belt buckle and insert the
connector tongue into the buckle.
Remove any slack from the seatbelt by pulling first on the lap section
and then on the diagonal section.
Feed the seat belt connector tongue through the seatbelt
routing slot (M) in the backrest and around the back of the
child seat.
Pass the seat belt connector tongue back through the second
seatbelt routing slot (M) in the backrest through to the front of
the child seat, ensuring the seatbelt is lying as flat as possible,
avoiding twists and kinks along its path.
Installing for group 1 [9-18kg]
(continued)
6
7
8
9
10
11
12
Placing your child in the seat - group 1 [9-18kg]
Summary of Contents for Group 1,2,3 Car Seat
Page 18: ...16 ...