Step 16 Attach Swing Asy and Swings
Step 18: Attach Swing Assembly and Swings
A:
Attach Swing Assembly from Step 3 to (A31) SW Mount with 1 (G5) 5/16 x 4-1/2” Hex Bolt (with lock washer,
flat washer and t-nut) and 1 (GL8) 5/16 x 2” Hex Bolt (with 2 flat washers and 1 lock nut) as shown in fig. 18.2.
B:
See Swing Hanger Cover Installation below.
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE ON LEVEL GROUND
Fig. 18.1
Belt Swing
1 x
5/16 x 4-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
1 x
5/16 x 2” Hex Bolt
(5/16” flat washer x 2, 5/16” lock nut)
Hardware
G5
GL8
Other Parts
2 x Belt Swing
4 x Swing Hanger Covers
Hex Bolt Assembly
Lock
Washer
T-Nut
Flat
Washer
Hex
Bolt
1
Step 16 Attach Swing Asy and Swings
GL8
Fig. 18.2
G5
A31
Lock washer
T nut
Flat washer
Flat washer
Lock
nut
Flat washer
Swing Hanger Cover Instructions:
1. Insert flexible Swing Hanger Cover over hook.
2. Slide Swing Hanger Cover around hook until at top.
3. Hook swing rope onto hook.
4. Twist and flex Swing Hanger Cover onto open end of hook.
2
3
4
33
