Step 15: Attach Wall Boards
A:
On both sides of (A30) Tarp Support attach 2 (A9) Cedar Walls to (A29) Side Top and (A14) SW Floor with 4
(S1) #8 x 1-1/8” Wood Screws per board. Make sure the bottom of the boards are tight against the gap boards and
the bevelled edges to the top, facing out. Space between boards should be 3-1/8”, but not to exceed 3-1/4”. (fig.
15.1 & 15.2)
B:
On both sides of (A31) SW Mount attach 2 (A9) Cedar Walls to (A29) Side Top and (A14) SW Floor with 4 (S1)
#8 x 1-1/8” Wood Screws per board. Make sure the bottom of the boards are tight against the gap boards and the
bevelled edges to the top, facing out. Space between boards should be 3-1/8”, but not to exceed 3-1/4”. (fig. 15.1
& 15.2)
Step 11 Wall Boards
Step 11 Wall Boards
Fig. 15.1
Fig. 15.2
A29
S1
A14
A9
A30
A14
A14
S1
A29
A31
A9
4 x
Cedar Wall 1 x 4 x 28”
A9
Hardware
Wood Parts
16 x
#8 x 1-1/8” Wood Screw
S1
30
A9
A9
Note: Gaps between boards
3-1/8”, not to exceed 3-1/4”
Note: Gaps between
boards 3-1/8”, not to
exceed 3-1/4”
4 per board
