Step 18 Attach Slide & Acro Swing
Step 20: Attach Slide and Acro Swing
STEP 18
Attach Rope Ladder
STEP 19
Attach Slide and Acro Swing
Step 18 Attach Slide & Acro Swing
Step 18 Attach Slide & Acro Swing
A:
Place Slide in the centre between (A20) Corner Post and (A13) Centre Divider. (fig. 20.1)
B:
Pre-drill 1/8” pilot holes and attach slide to fort through (A21) SL Spacer using 3 (S7) #12 x 2” Pan Screw. (fig.
20.2 & 20.3)
C:
Attach Acro Swing to the end of (A23) Acro Top making sure the knot is tight and secure. The spacing between
the Acro Swing and (A23) Acro Top should be no less than 10”. (fig. 20.1 & 20.4)
D:
Secure the Acro Swing ropes with 2 Cable Ties per rope. Be sure to trim the Cable Tie excess and round off
any sharp edges. (fig. 20.4)
Note: Pre-drill all holes using a 1/8” drill bit before installing the pan screws.
Fig. 20.1
Fig. 20.3
Fig. 20.2
A23
S7
A13
A20
A21
A21
Fig. 20.4
End of slide is
flush to A21
Other Parts
1 x Acro Swing
4 x Cable Ties
1 x Slide (sold separately)
Hardware
3 x
#12 x 2” Pan Screw
S7
10”
Secure with cable ties. Trim excess
cable ties and round sharp edges.
Acro swing spacing should
be no less than 10”
35
between
cable ties
1”
