31
2 x
Floor Joist 1-1/4 x 3 x 40-3/4”
Wood Parts
Hardware
091
8 x
#12 x 2” Pan Screw
Step 9: Join Swing and Slide Assemblies
Part 1
A:
With at least two helpers lift the Slide Wall Assembly and Swing Wall Assembly so the (072) Narrow Panel
Back and (073) Narrow Front Panel meet with (083) Wall Panel Back and (082) Panel Front Wall and are tight
together as shown in fig. 9.1.
B:
Make sure the assembly is square then on the inside of the assembly, tight to (071) Nest End Panel and
flush to the bottom of the panels attach 1 (091) Floor Joist to (072) Narrow Panel Back and (083) Wall Panel
Back using 4 (S7) #12 x 2” Pan Screws. Attach a second (091) Floor Joist to (073) Narrow Front Panel and (082)
Panel Front Wall with 4 (S7) #12 x 2” Pan Screws. (fig. 9.1 and 9.2)
Swing Wall
Assembly
S7
Fig. 9.2
Fig. 9.1
Slide Wall
Assembly
072
071
073
082
083
081
x 4 per board
S7
071
Flush
Tight
(both sides)
091
091
073
083
