110
Fig. 59.3
Fig. 59.4
Fig. 59.5
No gap
Note: It is important that all bottom barriers are installed flush to the lower frames leaving no gaps.
D:
Tight to (592) Barrier Bottom D, place (594) Barrier Bottom E across the opening on the Narrow Wall Panel side.
Attach to the (511) Wall Post using 2 (S11) #8 x 2” Wood Screws and to (592) Barrier Bottom D using 2 (S11) #8 x 2”
Wood Screws, making sure that these screws are installed on an angle as shown in fig.59.3 & 59.4.
E:
Place (595) Barrier Bottom A across the opening on the Rock Wall side so that it’s tight to the Rock Wall Frame.
Attach to the (511) Wall Post using 2 (S11) #8 x 2” Wood Screws and to the (051) Rock Wall H using 2 (S11) #8 x 2”
Wood Screws, making sure that these screws are installed on an angle as shown in fig.59.3 & 59.5.
Step 59: Install Bottom Barriers
Part 3
Wood Parts
1 x
Barrier Bottom E 15/16 x 3 x 21-1/4”
1 x
Barrier Bottom A 15/16 x 3 x 21-1/4”
594
595
L
M
S11
x 2
592
511
511
L
M
S11
x 2
592
594
Hardware
8 x
#8 x 2” Wood Screw
S11
595
051
L
M
S11
x 2
595
051
S11
x 2
594
