23
1 x
Rope Rail 2 x 2-1/2 x 57-13/16”
1 x
RW-AL Support 5/8 x 3-1/4 x 41-3/4”
1 x
Access Rope Ladder Gap 5/8 x 3-1/4 x 41-3/4”
1 x
Rope Bottom 1-1/4 x 2-1/2 x 18-3/4”
025
026
027
024
Wood Parts
Hardware
9 x
#8 x 2” Wood Screw
3 x
#8 x 1-3/8” Wood Screw
4 x
#8 x 3” Wood Screw
Fig. 2.3
Fig. 2.4
Fig. 2.5
S11
x 6
S11
S11
x 3 in
bottom
holes
x 3 in top
holes
S20
S20
S4
S4
S11
S20
S4
1-3/8” gap between top
Tread and Ladder Gap
Flush
D:
Making sure that the pre-sunk holes are facing the outside, place (024) Rope Rail on the ground next to
(022) Right Access so it matches the orientation of the two access rails as shown in fig. 2.5. Attach (025) RW-AL
Support flush to the top of Access Ladder assembly and (024) Rope Rail using 3 (S20) #8 x 1-3/8” Wood Screws
in the top holes and 3 (S11) #8 x 2” Wood Screws in the bottom holes. Pilot holes in (025) RW-AL Support should
be centred over the rails. (fig. 2.3 and 2.4)
E:
Place one end of the (026) Access Rope Ladder Gap on the (021) Left Access and the other end on the (024)
Rope Rail so there is a 1-3/8” gap between (026) Access Rope Ladder Gap and the top (023) Tread. Attach using
6 (S11) #8 x 2” Wood Screws. (fig. 2.3)
F:
Place (027) Rope Bottom between (024) Rope Rail and (022) Right Access and attach using
4 (S4) #8 x 3”
Wood Screws.
(fig. 2.5)
Step 2: Access Ladder/Rope Wall Assembly
Part 2
026
026
025
025
023
021
022
022
024
027
