21
90°
DO NOT USE
THESE IMAGES
Step 8: Connect Monkey Bar Assemblies
1-1/4”
MK Bracket
Hardware
2 x
5/16 x 3” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
8 x
#12 x 1” Pan Screws
2 x
MK Rail Long 2 x 4 x 52”
1 x
MK Rail Short 2 x 4 x 50”
S6
1367
1367
Fig. 8.1
Fig. 8.2
5/16” Flat
Washer
5/16” Lock
Washer
5/16”
T-Nut
S6
G10
G10
x 4
S6
Other Parts
2 x MK Bracket
A:
Using a MK Bracket connect both (1943) MK Rail Long and (1565) MK Rail Short to each (1367) Post MK with
1 (G10) 5/16 x 3” Hex Bolt (with lock washer, flat washer and t-nut) per bracket and MK Bracket to the rails using 2
(S6) #12 x 1” Pan Screws per rail as shown in fig. 8.1 and 8.2.
B:
Attach MK Bracket to both (1367) Post MKs with 2 (S6) #12 x 1” Pan Screws per bracket. (fig. 8.2)
Note: Pre-drill all holes using a 1/8” drill bit before installing the pan screws.
This end
connects
to Post
This end connects
to MK Mount
1565
1943
G10
