38
Wood Parts
Hardware
Step 21: Swing Side Wall Assembly
A:
In between both (1931) Posts on Swing Wall side attach 6 (1503) Cedar Walls to (2034) Wall Support and
(1895) Floor End using 4 (S0) #8 x 7/8” Truss Screws per board. The gap between boards should be evenly
spaced at 1”, not exceeding 1-1/4”. Make sure the bottom of the boards are tight against the floor boards and
bevelled edges are facing out and are at the top of the boards. (fig. 21.1 and 21.2)
Note: Gaps between
boards evenly spaced at
1”, not to exceed 1-1/4”
Note: Some boards were
removed for clarity
Bevelled edges
towards top and
facing out
24 x
#8 x 7/8” Truss Screw
6 x
Wall Board 1/2 x 4 x 20”
1503
S0
1931
2035
1931
1895
S0
x 4 per
board
Fig. 21.2
Fig. 21.1
1931
Swing Wall Side
2034
Note: Evenly space 3 on
each side of SW Mount
1503
x 6
