Kia G 3.8 DOHC, Manual

Page: 6 / 64

2007 > G 3.8 DOHC >
DESCRITION
Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data
for the engine operating conditions are preprogrammed in the memory of the PCM (Power Control Module).
The engine operating conditions (speed, load, warm-up condition, etc.) are detected by the various sensors. Based on
these sensor signals and the ignition timing data, signals to interrupt the primary current are sent to the PCM. The
ignition coil is activated, and timing is controlled.