5
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Toggle
®
Tables - Dual Motor Height-Adjustable Base, Model EL
Assembly Instructions
Wire Trough (Optional)
Note:
The wire trough is an
optional accessory that must be
ordered separately.
Note:
Control cables can be
routed differently than shown.
The control box can be mounted
to the underside of tabletops 24”
in depth at one location between
the cross-tube assembly
(Figure 5). Control boxes
mounting under tabletops 30”
or 36” in depth can mount in
one of five mounting locations,
one being the same as the
control box mounted between
the cross-tube assembly on
24” tabletops (Figure 5). If the
control box is mounted between
the cross-tube assembly,
reference Figure 5 for placement
of the wire trough. A 30” or 36”
depth tabletop is the only depth
which will allow a control box
to be in the following locations.
If the control box is mounted to
the front user side of the table,
reference Figure 6. Mounting
to the front of the table does
not require the use of the
“optional key pad” (Figure 6).
If the control box is mounted
behind the cross-tube assembly,
reference Figure 7.
Model Number
Operating Load Capacity
TOGL2448EL
220 lb
TOGL2454EL
215 lb
TOGL2460EL
210 lb
TOGL2466EL
205 lb
TOGL2472EL
200 lb
TOGL3048EL
210 lb
TOGL3054EL
205 lb
TOGL3060EL
200 lb
TOGL3066EL
192.5 lb
TOGL3072EL
185 lb
TOGL3648EL
200 lb
TOGL3654EL
192.5 lb
TOGL3660EL
185 lb
TOGL3666EL
177.5 lb
TOGL3672EL
170 lb
TOGLC3048EL
180 lb
Table Operating Capacity Chart
Figure 7 - Wire Trough Over One Cross-Tube with
Control Box Behind Cross-Tube Assembly, 30” or 36” Table Depth
wire
trough
tabletop
cross-tube
assembly
control
box
power
cord
key
pad cord
(optional)
leg control
cord (long)
leg control
cord (short)
