Lancaster
®
Auditorium Seating with Power & Data
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
7
Data Infeed Installation
1. Orient and attach the
power & data infeed bottom
bracket as illustrated, to the foot of
the upright using the floor fastener
bolt which secures the upright to
the floor (Figure 9).
2. Attach the power & data infeed
outer box to the upright arm gusset
at the top, and to the power & data
infeed bottom bracket below, using
1
/
4
-20 x
5
/
8
” Torx head screws and
1
/
4
-20 acorn nuts (Figure 9).
3. Position the power & data infeed
end cover as illustrated up to the
installed infeed outer box and
secure together using
1
/
4
-20 x
5
/
8
”
Torx head screws and
1
/
4
-20 acorn
nuts (Figure 9).
4. Locate the data wires. Route the
data wires through the data infeed
cover (Figure 9).
5. Secure the power & data infeed end
cover to the power & data infeed
outer box using four #8 x
3
/
8
” Torx
head screws (Figure 9).
