14
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Monitor Arms - Dual Screen, Two Double Extension Monitor Arms - Model CFS06
Assembly Instructions
Figure 5
Model CFS06
arm assembly
cable
manager
cable manager
release tab
joint cable
manager
Figure 6
Model CFS06
arm assembly
cable
manager
monitor
cable
Figure 7
monitor
cable
joint cable
manager
Model CFS06
arm assembly
Figure 4
dual hub
support ring
pole
assembly
worksurface
dual hub arm
assembly
Model CFS06
arm assembly
monitor
cable
Dual Screen, Two Double
Extension Monitor Arm
Assembly - Model CFS06 (cont.)
7. Insert monitor cables through
support ring tabs (Figure 4).
Arm Cable Manager
1. To remove the arm cable manager,
pinch the two release tabs on the
cable manager located on the
underside of the Model CFS06 arm
assembly (Figure 5).
2. Lay cables in arm cable manager
(Figure 6).
3. Snap cable manager back to the
underside of the arm assembly taking
note the text “FRONT” inside the
cable manager (Figure 6).
4. Feed monitor cables through joint
cable managers located on the
underside of arm assembly
(Figure 7).
5. To properly install monitor screen to
the faceplate of the monitor mount
assembly, reference “Mounting the
Monitor” instructions on page 17.
