8
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Monitor Arms - Single Screen Monitor Arm - Model CFS03
Assembly Instructions
Figure 6
cable manager
release tabs
height-adjust arm
cable manager
Model CFS03
extension arm
assembly
joint cable
manager
Figure 8
Detail B
cable manager
release tab
height-adjust arm
cable manager
Figure 7
height-adjust arm
cable manager
monitor
cable
monitor mount
assembly
Model CFS03
extension arm
assembly
Figure 9
support
ring
worksurface
monitor
cable
support
ring tab
Model CFS03
extension arm
assembly
joint cable
manager
Figure 4
support
ring
worksurface
monitor
cable
support
ring tab
Model CFS03
extension arm
assembly
monitor mount
assembly
Figure 5
worksurface
monitor
cable
Model CFS03
extension arm
assembly
joint cable
manager
cable
manager
support
ring tab
Single Screen Monitor Arm
Assembly - Model CFS03 (cont.)
8. Insert monitor cables through
support ring tabs (Figure 4). If
monitor cables will be routed
through optional height-adjust arm
cable, proceed to “Height-Adjust Arm
Cable Manager” instructions below,
otherwise feed the monitor cables
through joint cable managers located
on the underside of extension arm
assembly (Figure 5).
9. To properly install monitor screen to
the faceplate of the monitor mount
assembly, reference “Mounting the
Monitor” instructions on page 17.
Height-Adjust Arm Cable Manager
(optional)
1. To remove the height-adjust arm
cable manager, pinch the two release
tabs on the cable manager located on
the underside of the Model CFS03
extension arm assembly (Figure 6).
2. Lay cables in height-adjust arm cable
manager (Figure 7).
3. Snap cable manager back to the
underside of the extension arm
assembly taking note the text
“FRONT” inside the cable manager
(Figure 8 & Detail B).
4. Feed monitor cables through joint
cable managers located on the
underside of extension arm assembly
(Figure 9).
5. To properly install monitor screen to
the faceplate of the monitor mount
assembly, reference “Mounting the
Monitor” instructions on page 17.
