KGUARD Standalone DVR KG-SHA116 User Manual
7
www.kguardsecurity.com
Chapter 3. DVR Installation
3.1. Hard Drive Installation
Caution:
Please do not Install or take out hard drive when DVR is running!
The model has a HDD drawer. Please use provided key to take out the HDD drawer and put HDD into
the drawer correctly.
(1) Remove screws and open DVR upper cover carefully;
(2) Insert Power Cord and data cable into Pin of hard drive securely;
(3) Put the upper cover back carefully, re-attach screws.
3.2. Camera and Monitor Connection
Connect camera cable to video input port of DVR, and from video output of DVR to Monitor via BNC
connector or VGA port (refer to system figuration on Chapter 9.6).
If the camera is a PTZ speed dome, you could connect RS485 A & B to the corresponding port on
DVR respectively (refer to system figuration on Chapter 9.6).
3.3. Power Supply connection
Please only use the power adapter supplied with the DVR.
