ENGLISH
Chapter 3: Getting Started
DVR User’s Manual
37
3.6 Using PTZ Controls
If you are using a PTZ speed dome camera, you can configure the PTZ control settings.
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select
PTZ
.
Note:
This option is not available if the PTZ camera is in Cruise mode. See
“4.6.2 PTZ Setup” on page 62
.
3
The PTZ control panel appears on the screen.
Note:
To change the PTZ settings, see
“4.6.2 PTZ Setup” on page 62
.
1
2
3
4 5
6
7
8
10
11
9
No.
Icon
Item
Function
1
Channel Select
Click to select the channel of the PTZ camera.
2
Pointer pan
Click the direction arrow to select the direction of the PTZ camera.
Click the middle icon to switch to auto pan mode.
3
Zoom
Click to zoom in/out.
Focus
Click to adjust the focus.
Iris
Click to adjust the iris setting.
4
-
Time
Set a preset time.
5
Save
Click to save the settings and preset points.
6
Clear
Click to delete the selected preset.
7
Set Preset Point
Click to set a specific preset point on a PTZ camera.
Note:
You can set up to 255 preset bits for the DVR. However, the actual preset
quantity varies depending on the PTZ camera performance.
8
Go to Preset Point
Click to go to a specific preset point.
9
-
Total
Display the total of preset bit.
10
-
No.
Set a preset point.
11
Speed
Click to adjust the speed.
