Kguard BR1621 User Manual Download

Page: 10 / 116

ENGLISH

Chapter 1: Product Overview

DVR User’s Manual

1.3 Parts and Functions

1.3.1 Front Panel

4-Channel DVR

No.

Item

Icon

Description

Channel 1

Press to display Channel 1 in full screen.

Channel 2

Press to display Channel 2 in full screen.

Channel 3

Press to display Channel 3 in full screen.

Channel 4

Press to display Channel 4 in full screen.

Quad

Press to switch to 4-window display.

Play

Press to enter Playback mode or play recorded videos.

Pause

Press to pause the video playback or enter the frame-playback mode.

Stop

Press to stop the video playback or stop manual recording.

Record

Press to start manual recording.

10 PTZ

Press to enter PTZ mode.

Arrow Up

Press to move up in the OSD menu.

Arrow Down

Press to move down in the OSD menu.

13 Enter

In menu options, press to enter the selected menu item and edit the setting.

Arrow Left /
Rewind

Press to move left in the OSD menu.
During video playback, press to rewind the video.
Also used for switching OSD control panel.

Arrow Right /
Fast Forward

Press to move right in the OSD menu.
During video playback, press to fast forward the video.

Power Indicator

Lights red to indicate the power is turned on.

17 HDD Indicator

Lights red when the HDD is being accessed.

18 Menu / Escape

Press to enter or exit the OSD menu.

19 USB port

Connects to a USB mouse, flash disk, and other external storage drive.

Summary of Contents for BR1621





















































































































Search results

Summary of Contents for BR1621

Reviews:

Related manuals for BR1621

Brands by name

Popular brands

Kguard BR1621, User Manual

Search results

Summary of Contents for BR1621

Reviews:

Related manuals for BR1621

Brands by name

Popular brands