N7026A Probe
N7026A 150 MHz AC/DC High Sensitivity Current Probes User’s Guide
15
Safety Information
This manual provides information and warnings essential for operating this equipment in a
safe manner and for maintaining it in safe operating condition. Before using this equipment,
be sure to carefully read the following safety notes.
WARNING
This equipment is designed according to IEC 61010-1 Safety Standards, and has been tested for
safety prior to shipment. Incorrect measurement procedures could result in injury or death, as well as
damage to the equipment. Please read this manual carefully and be sure that you understand its
contents before using the equipment. The manufacturer disclaims all responsibility for any accident or
injury except that resulting due to defect in its product.
WARNING
Do not install substitute parts or perform any unauthorized modification to the instrument. Only
Keysight service centers should perform repair/maintenance on the equipment.
DANGER
To avoid short circuits and accidents that could result in injury or death, use the probe only
with insulated power lines carrying 300V or less.
DANGER
Never use this sensor on uninsulated conductors. The core and shield case are not
insulated. Before clamping the insulated conductor being measured, make sure that the
insulation on the conductor is undamaged. Any damage to the insulation can cause an
electric shock.
WARNING
Ensure that the input does not exceed the maximum rated current to avoid device damage,
short circuiting, and electric shock.
WARNING
Do not subject the unit to vibrations or shocks during transport or handling. Be especially careful to
avoid dropping the unit.
