N7026A Probe
N7026A 150 MHz AC/DC High Sensitivity Current Probes User’s Guide
9
External Power Adapter Socket
Jack DC socket to connect the probe to the power supply adapter shipped with the probe.
You use this option to power the probe using an external DC supply which allows the
probe to measure ± 30A
RMS
.
Refer to the topic
“Powering the Probe"
on page 17 to know when to use the external
power supply for the probe.
Bushing
Recommended for use in the probe’s sensor aperture to minimize the measurement
variation caused by the position variation of the conductor under test within the sensor
aperture.
Refer to the topic
“Installing and Removing Bushing"
on page 24 to know more.
Sensor Cable
The cable that connects the probe’s sensor to the output pod.
To avoid damaging the cable, do not tightly bend or pull the cable.
Component
Description
CAUTION
