14 Installation Note N5242-90125
Description of the Upgrade
Installation Procedure for the Upgrade
-
Once the license key file has been received and the information verified, you
can proceed with the installation at step 2.
Step 2. Remove the Outer Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the
PDF Service Guide
1
.
Step 3. Remove the Inner Cover
For instructions, click the Chapter 7 bookmark “Removing the Covers” in the
PDF Service Guide
Step 4. Inspect and (If Necessary) Remove the A4, A11, and A13
Synthesizer Boards, if They Are Not Version H
Verify that the synthesizer boards are all version H or greater.
1.
On the PNA: Press
Utility
>
System
>
Service
>
Utilities
>
View EEPROM
Headers
.
2.
Verify the LO Synthesizer, Src1 Synth, and Src2 Synth boards are all
version H or greater.
Refer to
.
If the model number, serial number, or option number do not match those
on your license key file, you will not be able to install the option. If this is
the case, contact Keysight for assistance before beginning the installation
of this upgrade. Refer to
“Contacting Keysight” on page 4
1. See
“Downloading the Online PNA Service Guide” on page 7
The N5240-60074 (with tabs) or N5240-60076 (without tabs) pretested
synthesizer boards will both show
Board P/N: N5240-63074
in the
EEPROM window (as shown in Figure 1 on Page 15).
If the synthesizer board part number displayed in the EEPROM Header
window is not N5240-63074 (e.g. N5242-63150), you will need to order
new synthesizer boards. Refer to “Contacting Keysight” on page 5. Refer
to
“Contacting Keysight” on page 4
.
Summary of Contents for N5241BU-205
Page 59: ......
