6
Repair Guide
122
Keysight N1913/1914A Service Guide
Step 6
Lift the display interface board off of the plastic mounting lugs
on the display support molding to separate them from one
another.
Step 7
Remove the three screws that are attached to the calibrator
assembly from the display support molding, and separate them
from one another.
Note:
Take care not to damage the EMI spring fingers on the
calibrator assembly.
Step 8
Disconnect the backlight cable assembly from the display
interface board and inverter board.
Step 9
Remove the two screws that are attached to the display inter
face board from the inverter board, and separate them from
one another.
Instructions
Visual
Summary of Contents for N1913
Page 1: ...Keysight N1913 1914A EPM Series Power Meters Service Guide...
Page 16: ...16 Keysight N1913 1914A Service Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK...
Page 18: ...18 Keysight N1913 1914A Service Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK...
Page 20: ...20 Keysight N1913 1914A Service Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK...