Keysight PXI General Purpose Switch Modules Startup Guide
18
Step 6. Verify Operation of the Module
Step 6. Verify Operation of the Module
Run Keysight IO Libraries Connection Expert
If Keysight Connection Expert is already running on the system controller, click
the
Refresh All
button to identify any hardware you have just installed or
re-connected.
If Connection Expert is not already running, run it now to verify your I/O
configuration. In the Windows Notification Area, click the IO icon ( ), then click
Keysight Connection Expert.
Locate your interfaces and instruments in the Keysight Connection Expert
Explorer Pane. The following graphic shows the Connection Expert screen.
Select a module in the center pane (Instrument I/O on this PC). The right-hand
Pane shows the instrument properties. Select the
Installed Drivers
tab
then click the
Start SFP
button.
You can use the Soft Front Panel (SFP) software to open and close the relays and
verify operation of the switch modules. The Soft Front Panel Software was
installed as part of the Software installation process.
