DNS Hostname
A hostname is the host portion of the domain name, which is translated into an IP address.
Each power supply is shipped with a default hostname with the format: Keysight-modelnumber-serialnumber,
where modelnumber is the power supply’s 6-character model number (e.g. E36231A), and serialnumber is the last
five characters of the 10-character power supply serial number located on the label on the top of the unit (e.g.
45678 if the serial number is MY12345678).
– The instrument receives a unique hostname at the factory, but you may change it. The hostname must be unique
on the LAN.
– The name must start with letter; other characters can be an upper- or lower-case letters, numeric digits, or
dashes ("-").
– This setting is non-volatile; it will not be changed by power cycling or *RST or SYSTem:PRESet.
1.
Press
Utilities
>
I/O Config
>
LAN Settings
.
2.
Select DNS Hostname field using the navigation keys. Press
and enter the hostname with the keyboard
provided. Press
Back
.
3.
Press
Yes
to save the setting.
4.
Press
No
to cancel all the changes and exit without saving.
52
Keysight E36200 Series User's Guide
