Product Markings
The CE mark is a registered trademark of the
European Community.
Australian Communication and Media Authority
mark to indicate regulatory compliance as a
registered supplier.
This symbol indicates product compliance with
the Canadian Interference-Causing Equipment
Standard (ICES-001). It also identifies the
product is an Industrial Scientific and Medical
Group 1 Class A product (CISPR 11, Clause 4).
South Korean Class A EMC Declaration. this
equipment is Class A suitable for professional
use and is for use in electromagnetic
environments outside of the home.
A
급 기기
(
업무용 방송통신기자재
)
이 기기는
업무용
(A
급
)
전자파적합기기로서 판 매자 또
는 사용자는 이 점을 주 의하시기 바라 며
,
가
정외의 지역에서 사용하는 것을 목적으 로 합
니다
.
This symbol on an instrument means
caution, risk of danger. You should refer to the
operating instructions located in the user
documentation in all cases where the symbol is
marked on the instrument.
This product complies with the WEEE Directive
marketing requirement. The affixed product
label (above) indicates that you must not discard
this electrical/electronic product in domestic
household waste.
Product Category
: With
reference to the equipment types in the WEEE
directive Annex 1, this product is classified as
“Monitoring and Control instrumentation”
product. Do not dispose in domestic household
waste. To return unwanted products, contact
your local Acqiris office.
This symbol indicates the time period
during which no hazardous or toxic substance
elements are expected to leak or deteriorate
during normal use. Forty years is the expected
useful life of the product.
This symbol indicates the instrument
is sensitive to electrostatic discharge (ESD).
ESD can damage the highly sensitive
components in your instrument. ESD damage is
most likely to occur as the module is being
installed or when cables are connected or
disconnected. Protect the circuits from ESD
damage by wearing a grounding strap that
provides a high resistance path to ground.
Alternatively, ground yourself to discharge any
built-up static charge by touching the outer shell
of any grounded instrument chassis before
touching the port connectors.
This symbol denotes a hot surface. The
side cover of the module will be hot after use
and should be allowed to cool for several
minutes.
Notices
Acqiris U5309A Startup Guide
6
