Step 5: Verify Operation of the U5309A Card
Front Panel LEDs
Indicator
Purpose
Color
State
Meaning
DPU
DPU status
Off
DPU is not configured
Green, blinking
card initialization in progress
Green
card OK (firmware not yet loaded)
White
DPU firmware loaded (ready)
STATUS
card status
White, blinking
Firmware initialization in progress
Green, blinking
card initialization in progress
Orange, blinking
Warning
Red, blinking
Error
Green
OK (ready)
If warning or error status is observed, please try the following steps:
Power-cycle the PC (If using a PCIe expansion chassis, observe the power sequence
requirements).
If the error persists please contact technical support
.
Step 5: Verify Operation of the U5309A Card
Keysight Connection Expert
The intention of this step is to verify correct operation of the newly installed card. Run
Keysight Connection Expert
by clicking the task bar icon
, and select
Connection
Expert
.
The list of installed cards is displayed. The instrument properties may be viewed by clicking on
the desired instrument from the list on the left.
Review the configuration data and then click on
Start soft front panel
to launch the
MD3 Soft
Front Panel
. This will provide control of the card for calibration, test and other operational
verification procedures.
16
Acqiris U5309A Startup Guide
