6
4000 X-Series Oscilloscopes Advanced Training Guide
1
Getting Started
Lab Guide—At a Glance
This advanced oscilloscope training guide and tutorial is intended to be used with
Keysight Technologies InfiniiVision 4000 X-Series oscilloscopes (DSO and MSO
models) that are licensed with the Oscilloscope Education Training Kit (DSOXEDK).
When licensed with this training kit, 4000 X-Series oscilloscopes are able to
generate a broad range of built-in training signals.
The built-in training signals can be probed by simply connecting a standard 10:1
passive probe between channel-1’s input BNC and the front panel terminal labeled
“Demo 1”, and another probe between channel-2’s input BNC and the terminal
labeled “Demo 2” as shown on the next page.
To turn on specific training signals for each of the labs documented in this training
guide, simply:
1
Press the scope’s front panel
[Help]
key.
2
Press the
Training Signals
sofkey.
3
Turn the
Entry knob to select the appropriate training signal, or use the all
new touchscreen interface to select a signal directly.
4
Press the
Output
softkey to enable the training signal output on the Demo
terminal(s). The signal will also begin output when double pressed in the menu.
