Features and Functions
3
Keysight 34980A Mainframe User’s Guide
151
To Build a Scan List From the Front Panel
– To add the active channel to the scan list, press
Channel (Configure)
.
Then select the function, range, resolution, and other parameters for this
channel. Then add the channel to the scan list by selecting:
SCAN THIS CHANNEL? > YES
– To remove the active channel from the scan list, select:
SCAN THIS CHANNEL? > NO
– To remove all channels from the scan list, select:
Scan (Configure) > CLEAR SCAN LIST? > YES
– To initiate a scan and store all readings in memory, press
Scan (Measure)
.
Each time you initiate a new scan, the instrument clears all previously stored
readings. If you have not defined a scan list,
Scan (Measure)
performs an
internal DMM scan independent of any channels.
– To stop a scan in progress, press and hold
Scan (Measure)
.
To Build a Scan List From the Remote Interface
– Use the
ROUTe:SCAN
command to define the list of channels in the scan list.
To determine what channels are currently in the scan list, use the
ROUTe:SCAN?
query command.
– To add channels to the present scan list, use the
ROUTe:SCAN:ADD
command.
To remove channels from the present scan list, use the
ROUTe:SCAN:REMove
command.
– To remove all channels from the scan list, send “
ROUT:SCAN (@)
”.
– To initiate a scan, use the
INITiate
or
READ?
command. Measurements are
stored in memory. Each time you initiate a new scan, the instrument will clear
the previous set of readings from memory.
– To stop a scan in progress, use the
ABORt
command.
