Keysight Technologies U3050BH11, User'S And Service Manual

Page: 8 / 48

U3050BH11 General Specifications
General Specifications
Specifications for the Test Set (2 GHz to 50 GHz) are characteristic. A functional certificate is only
offered for the Test Set. There are no system specifications.
Power Requirements
Verify that the required ac power is available before installing the Test Set to the PNA-X.
•
100/120/220/240 VAC (50/60Hz)
•
The instrument can operate with mains supply voltage fluctuations up to ± 10% of the
nominal voltage.
•
Air conditioning equipment (or other motor–operated equipment) should not be placed on
the same ac line that powers the Test Set and PNA-X.
•
Table 2 contains the maximum wattage for all instruments. This table can be use to
determine the electrical and cooling requirements.
This is a Safety Class I product (provided with a protective earthing ground
incorporated in the power cord). The mains plug shall be inserted only into a
socket outlet provided with a protective earth contact. Any interruption of the
protective conductor, inside or outside the instrument, is likely to make the
instrument dangerous. Intentional interruption is prohibited.
Table 2 Power Requirements
Standard Equipment
Instrument Maximum
Wattage
N5245A 450
U3050BH11 350
4 Keysight U3050BH11 User's and Service Guide