U3050BH11
Front and Rear Panel Features
Front and Rear Panel Features
Figure 2
U3050BH11 Front Panel
PNA-X to Test Set Interface Connectors – 1.85 mm (female)
•
PORT 1, SOURCE OUT, CPLR THUR and RCVR R1 IN
•
PORT 3
•
PORT 4
•
PORT 2, SOURCE OUT and CPLR ARM
Bulkhead Access Connectors 2.4 mm (female)
•
RCVR R1 IN, PORT 1, SOURCE OUT,
DUT OUT,
and
PXA
Standby LED
The LED is Off (not illuminated) when the Test Set is in Standby.
Standby Switch
Note that this switch is Standby only, not a line switch. The main power cord can be used as
the system disconnecting device. It disconnects the mains circuits from the mains supply.
Standby LED
Bulkhead Access Connectors
x5
(2.4 mm female)
Standby
Switch
Port 2
PNA-X Interface Connectors
x4
(1.85 mm female)
Port
4
Port
3
Port
1
Keysight U3050BH11 User's and Service Guide
7
Summary of Contents for U3050BH11
