Key Reference
Limit
72
Limit
Sets the pass/fail bar for traces. Two individual single
limit lines and single limit line with five multiple limit
segments are selectable. The tester also provides a limit
beep function to alert a failure of limit judgement. If
traces are below a limit or a limit segments, the tester
judges the measurement as “passed”, if the traces are
above the limit bars, the tester judges the measurement
as “failed”.
Limit 1
Pressing
[LIMIT] > {Limit 1}
brings up a sub menu for
editing a single limit applied horizontally across the
displayed bandwidth.
The amplitude range of a single limit varies according to
the current measurement mode. Refer to
for more information.
Key access:
[LIMIT] > {Limit 1}
Limit 2
Pressing
[Limit] > {Limit 2}
brings up a sub menu for
editing a single limit that applies a second horizontal
limit line across the displayed bandwidth.
The amplitude range of a single limit varies according to
the current measurement mode. Refer to
for more information.
Key access:
[LIMIT] > {Limit 2}
Summary of Contents for N9330B
