Keysight Technologies N9330B, User Manual

Page: 73 / 107

Key Reference
Distance
67
DTF Config
Lists and edits the DTF parameters.
Key access:
{DTF Config}
Pressing
{DTF Config}
brings up a check list, showing the
parameters in a DTF measurement:
•
Start Distance 
When you rotate knob to highlight this parameter and
press
[ENTER]
, the displayed start distance becomes
editable. This is equivalent to pressing
[FREQ/DIST] >
{Start}
in DTF mode.
•
Stop Distance

When you rotate knob to highlight this parameter and
press
[ENTER]
, the displayed stop distance becomes
editable. This is equivalent to pressing
[FREQ/DIST] >
{Stop}
in DTF mode.
•
Start Frequency

When you rotate knob to highlight this parameter and
press
[ENTER]
, the start frequency becomes editable.
This is equivalent to pressing [FREQ/DIST] > {Start}
when in non-DTF mode. Changing frequency range
changes the maximum measured and displayed
distance.
• Stop Frequency 
When you rotate knob to highlight this parameter and
press [ENTER] , the stop frequency becomes editable.
This is equivalent to pressing
[FREQ/DIST] > {Stop}
when in non-DTF mode. Changing frequency range
changes the maximum measured and displayed
distance. Refer to
"Distance" on page 66
, for
more information.
•
Resolution

When you rotate knob to highlight this 
parameter and press
[ENTER]
, the trace resolution
becomes editable. This is equivalent to pressing
[Meas/View] > {Resolution}
. Changing the 
resolution changes the maximum measured and
displayed distance.