Keysight Technologies N9330B, User Manual

Page: 46 / 107

Using Functions 
Using Markers and Pass/Fail Limit Lines
40
Using Markers and Pass/Fail Limit Lines
Markers and limit lines are used for measurement trace
analysis.
Using markers
Markers are used to track the specified points on a trace.
You may apply up to six markers and visually track up to
six points on each trace. Each of the six markers has the
following settings:
• On

Activates a Marker and places a vertical, colored bar,
with the Marker number ranging from M1 to M6 to the
foot of the bar.
• Off 
Deactivates a marker and erases the Marker bar.
• Edit 
Brings up a dialog box and allows you to set the posi-
tion of a marker.
• Marker to Peak 
Places the active marker on the highest indicated
value of the trace.
• Marker to Minimum 
Places the active marker on the lowest indicated
value of the trace.
• Delta 
Is associated with the reference marker (Marker 1 is
the default reference marker). Therefore, Marker 1
must be applied before creating the delta. Delta
displays the value difference between the reference
marker position and the delta marker position. Only
one delta marker can be associated with a given
reference marker.
NOTE
Rotating the knob will move the position of a marker.