Installation Note
N9000-90032
5
Option T03, T06 - Tracking Generator Installation Kit
1. Pre-Upgrade Status Check
Before performing this upgrade you will need to know the status of the instrument being upgraded in a
couple of areas.
Pre-Existing Issues and Error Messages
Power the instrument on and verify that the instrument will boot up properly. This would
include verifying that there are no error messages displayed in the Status Bar of the display.
If there are any problem with the instrument at this point, including the presence of any error
messages, either repair the instrument prior to proceeding with this upgrade or make detailed
notes of the instrument status in the space provided below and address them once this upgrade
has been completed if they continue to be present.
______________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
Pre-Upgrade Instrument Software Revision
Determine the current instrument software revision and record it in the space below by pressing
System
,
Show
,
System
on the instrument.
Instrument S/W Revision: ______________________
