Keysight Technologies N5991ST3A SATA, User Manual

Page: 28 / 82

28 Keysight N5991 SATA Test Automation Software Platform User Guide
3 Using the Software
Results
Run-Time Data Display
Most procedures generate data output. While the procedure is running,
the data is displayed in a temporary HTML page, which opens
automatically for each individual procedure.
The HTML pages that are opened during the procedure run then are then
closed once the specific procedure is finished. As long as the N5991
Software is running, each worksheet or page can be reopened with a
double-click on the respective procedure. However, the individual
worksheets or pages will be lost when the N5991 main window is closed,
unless they were saved by the user.
Results Workbook
All calibration and test data worksheets can be saved in a workbook by
selecting File > Save Results as Workbook... at any time. It is
recommended that this step is carried out at least at the end of each
N5991 run. If the calibration and test procedures are conducted several
times during the same N5991 run, the result worksheets are combined in
the workbook. If a test procedure is conducted without prior execution of
calibration procedures in the same test run, only the test results will be
saved to the workbook.
NOTE
As a safety feature, all calibration and test results are saved by default to
the N5991 “Tmp” directory (refer to “N5991 Getting Started Guide.pdf”).
The sub-folder “Results/SATA Station” contains the Excel files of the final
results measured at each calibration and test procedure. In addition to
the calibration data worksheets, the calibration data files are generated.
These files are saved by default to the N5991 calibrations folder. If these
calibrations are run again, the data file will be overwritten. In order to
save the calibration data files at each configuration, the files must be
copied from the directory: “ C:\ ProgramData\BitifEye\ValiFrameK1\
SATA\Calibrations ” and saved manually in any folder before rerunning
the calibrations