Keysight Technologies N5991ST3A SATA, User Manual

Page: 19 / 82

Keysight N5991 SATA Test Automation Software Platform User Guide 19
ValiFrame SATA Station 2
Configuration Parameters
In Figure 7 , various parameters, such as DUT Type , Data Rate and
Compliance Mode or Expert Mode can be selected. The description of all
such parameters is available in Table 1 .
Table 1 DUT parameter list
Parameter name Description
DUT Parameters
DUT Name Name of the DUT; used to identify the product
Serial Number Serial number of the DUT; used to identify the product
DUT Type The DUT types are Device or Host. They have different specification limits and default BIST activation settings.
Data Rate The maximum data rate the DUT supports. This can be selected as 1.5 GBit/s, 3.0 GBit/s, or 6.0 GBit/s.
Note: For M8040A, 1.5 GBit/s data rate is not available.
Spec Version The available version is: UTD 1.6.
Interface This can be “i” (internal), “m” (external) or “u”. “i” and “m” use different spec limits but are identical otherwise. “u” has a special
calibration procedure for gen3 hosts.
Description Text field for product description
Test Parameters
User Name User name text field.
Comment Text file for user comments.
Initial Start Date Time stamp of the start of the current session.
Last Test Date Time stamp of the last test conducted in the current session.
Compliance Mode Tests are conducted as mandated by the UTD. The parameters that are shown in the calibration and test procedures cannot be
modified by the user
Expert Mode Calibration and test procedures can be conducted beyond the limits and constraints of the UTD. The parameters that are shown
in the calibration and test procedures can be modified by the user.