Installation Note N5222-90133 39
Description of this Upgrade
Step 16. Install "SRC3 J13" Label on Rear Panel (Option 422/423 With and Without
Option 029 Only)
Step 16. Install "SRC3 J13" Label on Rear Panel (Option 422/423
With and Without Option 029 Only)
For this step, refer to
.
1.
Verify that rear panel surface is clean.
2.
Install SRC3 J13 label to the rear panel.
Figure 23
Install "SRC3 J13" Label on Rear Panel (N5240-80042)
Step 17. Remove and Replace the A55 Solid State Drive (SSD)
For instructions, click the Chapter 7 bookmark “Removing and Replacing the
A55 Solid State Drive (SSD)” in the PDF Service Guide
1
.
Skip this step, if your PNA already has a 256 GB SSD installed and with
A.14.00 firmware or greater installed.
1. See
