8
N2840/1/2/3A and N2853A User’s Guide
Using the Probe
Using the Probe
This section describes how to attach the various accessories as well as the
channel ID tags. Before making measurements, compensate the probe as
explained in
Channel Identification Tags
When multiple probes are connected to the oscilloscope, it can be difficult to
determine which probe is connected to each oscilloscope channel. To quickly
identify a probe tip with the associated channel input, use the colored channel ID
tags. Snap one color-matched tag to each end of the probe’s cable as shown in
. Select the tag color that matches the oscilloscope’s channel color.
Figure 2
Channel ID Tags Attached to the Probe Cable
WARNING
Must be Grounded. Before making connections to the input leads of
this probe, ensure that the probe’s output connector is attached to the
channel input of the oscilloscope and that the oscilloscope is properly
grounded.
WARNING
The maximum input voltage rating of the probe decreases as the
frequency of the applied signal increases. Refer to
CAUTION
To protect against electrical shock, use only the accessories supplied
with or available for this probe.