Keysight Technologies N2840A, User Manual

Page: 4 / 24

4 N2840/1/2/3A and N2853A User’s Guide
Introduction
Introduction
The N2840/1/2/3A and N2853A high-impedance passive probes and accessories
are a great choice for high quality at a very reasonable price. With the exception of
the N2840A, the probes include probe ID capability that allows most
oscilloscopes, such as Keysight’s InfiniiVision and Infiniium series, to detect the
probe’s impedance and attenuation ratio.
Oscilloscope Compatibility
To be compatible with the probes, the oscilloscope must have a 1 M
W
input
resistance shunted by 5 to 30 pF of input capacitance.
Handling the Probe
Handle the probe with care and refer to the safety notices in this manual. The
probe cable is a sensitive part of the probe, so use care not to damage the probe
through excessive bending or pulling. Avoid any mechanical shocks to the probe
to guarantee accurate performance and protection.
Table 1 Quick Probe Comparison
N2840A N2841A N2842A N2843A N2853A
Bandwidth (–3 dB)
50 MHz 150 MHz 300 MHz 500 MHz 350 MHz
Attenuation Ratio
10:1 10:1 10:1 10:1 10:1
Probe ID
No Yes Yes Yes Yes
CAUTION
Before using the probe, refer to “Safety Information"
on page 18
.
CAUTION
Always wear an ESD wrist strap when working with the probe. Not
doing so can result in the probe becoming permanently damaged.