Keysight Technologies N2750A, User Manual

Page: 60 / 76

60 N2750/1/2A User’s Guide
6
Performance Verification
Table 6 Required Test Equipment (Sheet 1 of 2)
Test Equipment Recommended Model
Performance Test
1 2
Infiniium Oscilloscope If a 90000 Q/X-Series oscilloscope is used, an N5442A precision BNC
adapter is required.
?
Digital Multimeter Keysight 33401A or equivalent). Critical specification: 2 wire resistance
accuracy
?
Vector Network Analyzer
(VNA)
Keysight E8361A/C (2-port). Although
this procedure assumes an E8361A/C, an
equivalent VNA that covers at least a
50 MHz to 13 GHz range is acceptable.
The VNA needs to have a bias port for
PORT 1 which consists of internal bias
T’s and a BNC port that allows bias to be
applied to PORT 1 .
?
Test Port
Cables/Adaptors
Two cables with male 3.5 mm connectors. If 2.4 mm or 1.85 mm cables are
selected, use Keysight 11901D adaptors to convert to 3.5 mm male
connectors.
?
PV Fixture E2655B or N5443A
Performance Verification
(PV) Fixture. This fixture is
included with the Deskew
Kit which is shipped with
Infiniium oscilloscopes.
?
Calibration Module Keysight N4691B Electronic Calibration
Module, 300 kHz to 26.5 GHz, 3.5 mm, 2-port.
An equivalent 3.5 mm cal kit can be
substituted for the N4691B.
?
Probe Power Supply Keysight 1143A Probe Offset Control and
Power Module
?
Probe Adapter Keysight N1022B Probe Adapter. Or, use a Keysight N5477A
Sampling Scope Adapter with a Keysight N5442A Precision
BNC adapter.
?