14
N2750/1/2A User’s Guide
1
Using the Probes
N2778A Socketed Tip
Use the N2778A socketed tip for connecting the probe directly to 0.25-inch
header pins. For best performance, use this tip in differential mode with inputs A
and B connected to test nodes. The socketed leads include a damping resistor.
The probes have the following bandwidths when using this tip:
N2752A Probe Amplifier: . . . . . . . . . . . . . . . . . . . . . . . . . . .3 GHz
N2751A Probe Amplifier: . . . . . . . . . . . . . . . . . . . . . . . . . . .3 GHz
N2750A Probe Amplifier: . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 GHz
When installing the tip on the probe, the tip’s symmetrical design allows you to
orient the tip so that the blue lead can be located on the probe’s A or B side.
NOTE
The color and position of the leads is not important except to allow you to
easily distinguish between the
A
and
B
leads.
Figure 7
Socketed Tip
Summary of Contents for N2750A
