Keysight Technologies N2750A, User Manual

Page: 45 / 76

Characteristics and Specifications
4
N2750/1/2A User’s Guide 45
Maximum Signal Slew Rate 30V/ns (differential, 10:1)
15V/ns (single-ended, 10:1)
Zero Offset Error Referred to Input < 30 mV before calibration scope
< 5 mV after calibration scope
Propagation Delay 6.85 ns
ESD Tolerance > 8 kV from 100 pF, 300
Ω
, HBM
Output Impedance 50 Ω
Cable Length 1.3m
Probe Weight 100g
Ambient Operating Temperature 0°C to +40°C
Ambient Non-Operating Temperature –40°C to +70°C
Operating Humidity Up to 95% relative humidity at +40°C non-condensing
Non-Operating Humidity Up to 90% relative humidity at +65°C non-condensing
Operating Altitude 4,600m
Non-Operating Altitude 15,300m
EMC/EMI Radiated Emission: CISPER 11 Group 1, Class A.
ESD: IEC61000-4-2 4KV Contact discharge, 8KV Air discharge
a Denotes warranted electrical specifications at 2:1 attenuation mode after 20 minute warm-up. All others are typical.
b Assumes symmetric differential signals.
c When calibrated on the oscilloscope, these characteristics are determined by the oscilloscope characteristics.
Table 5 Electrical Characteristics and Specifications (Sheet 2 of 2)
Model Number N2750A N2751A N2752A