12
Record Playback (Opt 236)
Allows you to record SA traces and play them back at a
later time. You are allowed to change most SA settings
during a recording. Setting changes are recorded along
with the traces.
To record a new session:
Press
Trace 6
then
Record Playback Setup
Then
New Session
,
Recorder Player
, then
Record
Optionally set the following
Recording Configuration
:
Record Time
– limits record time.
Record Source
– choose where in the FieldFox data
flow that data is recorded. RawMeas is easiest.
Record Interval
– sets the amount of time to wait
between individual trace recordings.
Segment Count
– sets the number of traces to
record.
FreqMaskTrigger
– sets the power level which will
trigger a recording.
To play a session:
Press
Recall Session
select a session, press
Open
.
Then
Recorder Player
then
Play
.
Run/Hold
can be used to Pause and Resume during
Record or Playback.
The maximum recording time is determined largely by
the amount of available memory. To maximize recording
time, select
Storage Device
then
USB
(flash drive) or
SD Card
.
