8
Multi-Trace Configurations (NA Mode)
You can display multiple traces on the FieldFox screen.
The above image shows a 3-trace configuration. Tr1 is
the ACTIVE trace as indicated by the highlighted
Tr1
annotation in the upper left corner.
The Frequency Range, IF BW, Resolution, Averaging, and
Output power is common to all traces. All trace settings,
such as format, markers, and limit lines, are applied to
the ACTIVE trace in the same manner as when a single
trace is present.
To select a multi-trace configuration:
Press
Trace 6
then
Num Traces
Then choose a multi-trace configuration.
To activate a trace in order to change a setting:
Use the
▲|▼
arrows to scroll through the traces -
OR
Press
Trace 6
then select
Trace 1
,
Trace 2
,
Trace 3
, or
Trace 4
, Only traces that are shown can
be activated.
By default with Multi-trace configurations, Markers that
are applied to one trace are applied to ALL traces.
