4 Keysight E8363B/C and E8364B/C Installation Note
General Information
Installation Procedure for the Upgrade Kit
1-
Installation Procedure for the Upgrade Kit
The network analyzer must be in proper working condition prior to installing
this option. Any necessary repairs must be made before proceeding with this
installation.
These parts are for analyzers WITH Option 014 AND Option 081
Lower front panel overlay (Option UNL/014)
1
E8364-80011
W67
RF cable, A25 test port 1 coupler to PORT 1 CPLR ARM
1
E8364-20043
W68
RF cable, A26 test port 2 coupler to PORT 2 CPLR ARM
1
E8364-20044
W71
RF cable, RCVR R2 IN to A29 channel R2 mixer
1
E8364-20155
W81
RF cable, A36 step attenuator to PORT 1 SOURCE OUT
1
E8364-20053
W82
RF cable, A37 step attenuator to PORT 2 SOURCE OUT
1
E8364-20054
W83
RF cable, PORT 1 CPLR THRU to A38 bias tee
1
E8364-20039
W84
RF cable, PORT 2 CPLR THRU to A39 bias tee
1
E8364-20040
W99
RF cable, A45 reference switch to A28 channel R1 mixer
1
E8364-20154
Table 1
Contents of Option UNL Upgrade Kit (E8364-60108)
Ref.
Desig.
Description
Qty
Part Number
This installation requires the removal of the analyzer’s protective
outer covers. The analyzer must be powered down and
disconnected from the mains supply before performing this
procedure.
