Keysight E8363B/C and E8364B/C Installation Note 27
General Information
Installation Procedure for the Upgrade Kit
Step 11.Enable Option UNL
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— A mouse is required.
Enable Option UNL
1.
On the analyzer’s System menu, point to Service, and then click Option
Enable.
2.
In the Select Desired Option list, click UNL - Bias Tees w/Atten.
3.
Click Enable.
4.
Click Yes in answer to the displayed question in the Restart Analyzer? box.
5.
When the installation is complete, click Exit.
Verify that Option UNL is Enabled
1.
On the analyzer’s Help menu, click About Network Analyzer.
2.
Verify that “UNL” is listed after “Options:” in the display.
3.
Click OK when done.
If Option UNL has not been enabled, perform
again. If
the option is still not enabled, contact Keysight Technologies. Refer to
