Keysight Technologies E7515B UXM 5G Getting Started Manual Download Page 103

Page: 103 / 109

Getting Started Guide 103

Test Platform Operating System
Updating the Keysight 5G NR Test Application

Once the application software has been installed, you must follow the

instructions provided in

“Licensing” on page 35

in order to install the license

required (if not previously installed), and select and start up the application as

described in the procedure

“Turning On the Test Platform the First Time” on

page 30

Installation of Third Party Software

It is recommended that you do not install any non-approved software on the

UXM 5G. Installation of third party software on the UXM 5G may render the
system inoperative and is not supported by Keysight Technologies.

Summary of Contents for E7515B UXM 5G














































































































Search results

Summary of Contents for E7515B UXM 5G

Reviews:

Related manuals for E7515B UXM 5G

Brands by name

Popular brands

Keysight Technologies E7515B UXM 5G, Getting Started Manual

Search results

Summary of Contents for E7515B UXM 5G

Reviews:

Related manuals for E7515B UXM 5G

Brands by name

Popular brands