Keysight Technologies 85059A 1.0 mm Calibration and Verification Kit
2-3
Specifications
Mechanical Characteristics
Mechanical Characteristics
Supplemental
Mechanical
Characteristics
Supplemental mechanical characteristics are values which are typically met by
the majority of calibration and verification kit devices that have been tested at
Keysight Technologies. These supplemental characteristics are intended to
provide useful information in calibration and verification kit applications. These
are typical but non-warranted performance parameters. The following table
lists the typical mechanical characteristics of the devices in this kit.
Center Conductor
Protrusion and Pin
Depth
Mechanical characteristics such as center conductor protrusion and pin depth
are
not
performance specifications. They are, however, important supplemental
characteristics related to electrical performance.
Keysight Technologies verifies the mechanical characteristics of the devices in
this kit with special gaging processes and electrical testing. This ensures that
the device connectors do not exhibit any center conductor protrusion and have
proper pin depth when the kit leaves the factory.
Table 2-2
Offset Short Typical Mechanical Characteristics
Characteristic
Typical Value
Inside Diameter of Outer Conductor
1.000
±
0.005 mm
Outside Diameter of Center Conductor
0.434
±
0.003 mm
Offset Length
Nominal
±
0.008 mm
Pin Depth
0 (flush) to 0.010 mm (maximum
recession)
Flatness of Reference Plane
0.002 mm (worst case)
Summary of Contents for 85059A
Page 2: ...Keysight Technologies 85059A 1 0 mm Calibration and Verification Kit...
Page 10: ...Contents 85059A TOC iv...
Page 30: ...3 2 Keysight Technologies 85059A 1 0 mm Calibration and Verification Kit Making Connections...
Page 62: ...8 2 Keysight Technologies 85059A 1 0 mm Calibration and Verification Kit Standard Definitions...
