85059A 1.0 mm Calibration and Verification Kit
1-9
General Information
Incoming Inspection
Incoming Inspection
The foam-lined storage case provides protection during shipping. If the
case or any device appears damaged, contact Keysight Technologies - refer to
“Contacting Keysight” on page 6-2
. Keysight will arrange for repair or
replacement of incomplete or damaged shipments without waiting for
a settlement from the transportation company. When you send the kit or device
to Keysight, include a service tag (located at the rear of this manual) on which
you provide the following information:
•
Your company name and address.
•
A technical contact person within your company, and the person's
complete phone number.
•
If you are returning a complete kit, include the model number and serial
number.
•
If you are returning one or more devices, include the part numbers and
serial numbers.
•
Indicate the type of service required.
•
Include any applicable information.
Summary of Contents for 85059A
Page 2: ...Keysight Technologies 85059A 1 0 mm Calibration and Verification Kit...
Page 10: ...Contents 85059A TOC iv...
Page 30: ...3 2 Keysight Technologies 85059A 1 0 mm Calibration and Verification Kit Making Connections...
Page 62: ...8 2 Keysight Technologies 85059A 1 0 mm Calibration and Verification Kit Standard Definitions...
