Key System US Atlas IIE KSX 32i, Installation Manual

Page: 29 / 59

Installing Station Wiring
DANGER: TO REDUCE THE RISK OF ELECTRICAL SHOCK AND PERSONAL INJURY,
USE CARE WHEN INSTALLING STATION WIRING.
6.04. Observe the following precautions when installing station wiring:
l
Never install telephone wiring during a lightning storm.
l
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
l
Never touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
l
Use caution when installing or modifying telephone lines.
Connecting Power Cords
WARNING! Do not attach power supply cords to building surfaces.
6.05. The basic system is supplied with a detachable power supply cord. The cord should
be dressed for appearance and safety, but never attached to the building surface.
Complying with EMI Filter Requirements
Caution! This equipment has been tested and found to comply with requirements,
designed to provide reasonable protection against radio frequency energy
when operated in a commercial environment.
6.06. The front panel cover for the cabinet is designed to meet EMI filter requirements
when installed and secured to the cabinet using retaining screws. Prior to operation,
the front panel cover must be installed and secured in place using the retaining
screws.